What is Spring Grinding MachineUpdate：2024-03-15 Hot：232
● Structure of Spring Grinding Machine ToolThis spring grinding machine tool is used for simultaneously grinding two end faces of compression springs. The machine tool has two grinding heads, upper and lower, and the spindle is located on the same centerline. The upper and lower grinding heads are independently driven by two motors.
The head feed is also operated independently by two handwheels. The feeding tray is driven by a separate speed regulating motor, and its feed rate can be adjusted by a manual wheel during startup.
This spring grinding machine tool is equipped with a grinding wheel dressing device, which is used to timely adjust the grinding wheel end face and achieve better grinding results. This machine tool is used for dry grinding springs. In order to protect the health of the operator and improve environmental hygiene conditions, equipped with a vacuum cleaner, driven by a separate motor.
● Operation and Use of Spring Grinding Machine
1. First, prepare the grinding sleeve according to the height requirements of the spring. The height of the grinding sleeve should be about 3mm lower than the height of the spring. Then, adjust the height of the grinding wheel using a handwheel and lock it in place.
2. Adjust the height of the lower guide plate at the spring inlet, which should be slightly higher than the plane of the lower grinding wheel, and the height of the upper guide plate should be slightly lower than the plane of the upper grinding wheel, so that the spring can smoothly enter the grinding surface of the grinding wheel.
3. Adjust the height of the guide plate at the spring outlet to be slightly lower than the plane of the lower grinding wheel.
4. Adjust the rotation speed of the turntable according to the spring wire diameter, and the speed will be slower if the wire diameter is larger. On the contrary, it is faster. (Note that it should be adjusted during startup)
5. When starting up for the first time, pay attention to opening the cover of the oil injection hole on the disc mounted speed control motor to prevent air expansion and oil leakage.
Xinding spring grinding machine manufactured in cast iron body with good mass (weight) gives no vibration and noise. Spring end grinders gives smooth.Our grinding machines offer you proven technology in perfect combination with infinitely variable cutting speed, fully automatic dressing, laser-controlled.
